WE GIVE
YOU POWER

FERRO F-POWER NEW
BALL VALVES

Zawory Ferro Zawory Ferro

Water system fittings
FERRO valves

NEW

Ball valves
F-POWER

Schemat ZAWORY KULOWE F-POWER Schemat ZAWORY KULOWE F-POWER

Advantages:

  • warranty: 10 years
  • valve bore without any constriction affecting the flow, full port according to standard
  • valves are adapted to potable water - surface, which may have contact with potable water (inside the valve and connection threads) is not nickel plated
  • solid metal handle
  • the gland on the stem allows compensation of possible clearance by means of a simple wrench
  • chrome plated and polished ball resistant to blocking
  • thick walls and solid workmanship - increased durability and strength
  • quality control carried out strictly according to applicable European standards
  • 100% of the valves produced are tested for leakage
  • valve’s bodies have permanent markings required by the European standards
  • valves have removable rubber bands to identify installation on the hot water/supply or cold/return pipe and labels with EAN codes and the necessary data to facilitate retail sales
  • the use of the highest quality materials, care for solid workmanship, the use of modern technologies and multi-stage quality control have resulted in the new F-Power line being awarded the Quality International 2021 Gold Emblem

Operating parameters and scope of application:

  • nominal pressure: 3.0 MPa (30 bar)
  • nominal working temperature: min -30°C, max. 120°C
  • working media: water (water supply systems and central heating), max. 50% glycol solution in water , compressed air
  • ball valves have received a National Technical Assessment Certificate issued by the Building Research Institute in Warsaw stating suitability for use in construction and Hygienic Certificate issued by the National Institute of Hygiene in Warsaw

Workmanship and materials:

  • Workmanship and materials:bodies and nuts are made of moulded parts and processed by machine tools
  • body material: CW617N brass
  • ball finish: chrome plated, polished
  • ball sealing: PTFE
  • stem sealing: PTFE

See the video

Product KFP

F-Power
Ball valve flat handle, female-female, 1/2"-F-POWER KFP

Product KFPM

F-Power
Ball valve, butterfly handle, female-female KFPM

Product KFP

F-Power
Ball valve,flat handle, male-female, 3/8" KFP

Product KFPM

F-Power
Ball valve, butterfly handle, female-female, KFPM

Product KFPN

F-Power
Ball valve, butterfly handle, male-male, 1/2" KFPN

Product KFPS

F-Power
Ball valve, flat handle, male-female, with union, 1/2" KFPS

Product KFPS

F-Power
Ball Valve, butterfly handle, male-female, with union, 1/2" KFPS

Product KFPMxSG

F-Power
Ball valve with glued union, female, 1/2" KFPMxSG

Product KFPS3T

F-Power
Ball valve with thermometer, male-female with union, 1" KFPS3T

Product KFPS3A

F-Power
Ball valve, , angle, male-female with union, 1" KFPS3A

Product KFPMT1-2

F-Power
Ball valve with M10x1 connection for a temperature sensor, 1/2" KFPMT1-2

Product KFPZF

F-Power
Ball valve with a filter, 1/2" KFPZF

Product KFPO

F-Power
Ball valve with drain, flat handle, female-female, 1/2" KFPO

Product KFPOM

F-Power
Ball valve with drain, flat handle, female-female, 1/2" KFPOM

Product KFPW

F-Power
Ball valve with air vent and drainage, female-female, 1/2" KFPW

Product KFPxP

F-Power
Ball valve with knob and rosette, underplaster, female-female, 1/2" KFPxP

Product KFPxD

F-Power
Ball valve with lever handle and rosette, underplaster, female-female, 1/2" KFPxD

Product KFPL

F-Power
Ball valve with solder connection, flat handle, DN12 KFPL

Product KFPL

F-Power
Ball valve with solder connection, butterfly handle, DN12 KFPL

Product KFM

F-Power
Ball valve angular DN15 with half union KFM

Product KFM

F-Power
Ball valve angular DN20 with half union KFM

Product KFM

F-Power
Ball valve angular DN15 with half union and filter KFM

Product KFM

F-Power
Ball valve angular DN20 with half union and filter KFM

Product KFM

F-Power
Ball valve angular DN20 with half union, filter and check valve KFM

Product KFM

F-Power
Ball valve angular DN15 with half union handle under body KFM

Product KFM

F-Power
Ball valve angular DN20 with half union handle under body KFM

NEW

Ball valves
F-COMFORT

Schemat ZAWORY KULOWE F-COMFORT Schemat ZAWORY KULOWE F-COMFORT

Advantages:

  •  F-Comfort series valves were awarded the Gold Medal at the Poznan 2020/2021 International Trade Fair for Installations and Equipment
  • warranty: 5 years
  • valves are adapted to potable water - surface, which may have contact with water (inside the valve and connection threads) is not nickel plated
  • solid metal handle
  • the gland on the stem allows compensation of possible clearance by means of a simple wrench
  • chrome plated and polished ball resistant to blocking
  • thick walls and solid workmanship - increased durability and strength
  • quality control carried out strictly in accordance with applicable European standards
  • 100% of the valves produced are tested for leakage
  • valve’s bodies have permanent markings required by the European standards
  • valves have removable rubber bands to identify installation on the hot water/supply or cold/return pipe and labels with EAN codes and the necessary data to facilitate retail sales

Operating parameters and scope of application:

  • nominal pressure: 2,0 MPa (20 bar)
  • nominal working temperature: max. 100°C
  • working media: water (water supply systems and central heating)
  • ball valves have received a National Technical Assessment Certificate issued by the Building Research Institute in Warsaw stating suitability for use in construction and Hygienic Certificate issued by the National Institute of Hygiene in Warsaw

Workmanship and materials:

  • valves are made in ABT (Advanced Body Technology) technology, combining advanced design and material solutions
  • body material: brass CW617N-4MS - the newest hygiene standard
  • ball finish: chrome plated, polished
  • ball sealing: PTFE
  • stem sealing: PTFE

See the video

Ball valves
HERKULES

Sprężone powietrze
Schemat ZAWORY KULOWE HERKULES Schemat ZAWORY KULOWE HERKULES

Advantages:

  • warranty: 15 years
  • metal handle
  • double stem seal
  • valve bore without any constriction affecting the flow, full port according to standard
  • connection threads with a large number of thread turns provides a secure and tight connection
  • the gland on the stem allows compensation of possible clearance by means of a simple wrench
  • chrome plated and polished ball resistant to blocking
  • thick walls and solid workmanship - increased durability and strength
  • quality control carried out strictly according to applicable European standards
  • 100% of the valves produced are tested for leakage
  • valve’s bodies have permanent markings required by the European standards
  • valves adapted to potable water - surface, which may have contact with water (inside the valve and connection threads) is not nickel plated

Operating parameters and scope of application:

  • nominal pressure: 4.0 MPa (40 bar)
  • max. working temperature: 140°C
  • working media: water (water supply systems and central heating), max. 50% glycol solution in water (solar and central heating installations), compressed air
  • Herkules ball valves type V17 have received a National Technical Assessment Certificate issued by the Building Research Institute in Warsaw stating suitability for use in construction and Hygienic Certificate issue

Workmanship and materials:

  • bodies and nuts are made of moulded parts and processed by machine tools
  • body material: CW617N brass
  • ball finish: chrome plated, polished
  • ball sealing: PTFE
  • stem sealing: PTFE

Ball valves
OTHER

Schemat ZAWORY KULOWE POZOSTAŁE Schemat ZAWORY KULOWE POZOSTAŁE

Advantages:

  • chrome plated and polished ball resistant to so-called „baking”
  • robust design
  • quality control carried out strictly according to the applicable European standards
  • 100% of produced valves are subjected to tightness test
  • markings, in compliance with required standards are embossed on the bodies
  • internal surface suitable for drinking water

Operating parameters and scope of application:

  • nominal pressure: from 1.0 MPa to 2.5 MPa* (from 10 bar to 25 bar)
  • max. working temperature: 100°C
  • working media: water (water supply systems and central heating)
  • ball valves have received a National Technical Assessment Certificate issued by the Building Research Institute in Warsaw stating suitability for use in construction and Hygienic Certificate issued by the National Institute of Hygiene in Warsaw

Workmanship and materials:

  • bodies and nuts are made of moulded parts and processed by machine tools
  • body material: CW617N brass
  • ball finish: chrome plated, polished
  • ball sealing: PTFE
  • stem sealing: PTFE or NBR, EPDM
  • stainless steel filter cartridges

ANGLE
Valves

Schemat ZAWORY KĄTOWE

Advantages:

  •  solid workmanship
  • quality control carried out strictly according to the applicable European standards
  • 100% of produced valves are subjected to tightness test
  • valve’s bodies have permanent markings required by the European standards
  • internal surface suitable for potable water

Operating parameters and scope of application:

  • nominal pressure: 1,0 MPa (10 bar)
  • max. working temperature: 100°C
  • working media: hot and cold water (water systems)

Workmanship and materials:

  • bodies made of high-quality CW617N brass
  • seals made of NBR or PTFE
  • stainless steel filter cartridges

Valve characteristics
The comparison

Type of valve
Thread type
Nominal pressure
Max. working temperature
Full bore in compliance with standards
Gland allowing backlash compensation
Working media
Hygienic certificate
Warranty
G 3,0 MPa 120°C yes yes
yes 10 years
G 2,0 MPa 100°C reduced yes
yes 5 years
Rp, R 4,0 MPa 140°C yes yes
yes 15 years

Thread characteristics
The comparison

Thread
Sketch
Description
In compliance with norms
Compatibility
Seal
G
Cylindrical pipe thread joints with tightness not obtained on the thread
ISO 228
Male thread G can only be screwed into female thread G
Sealing by pressing down on two flat surfaces and an additional seal or on a 60° cone
Rp
Cylindrical pipe thread internal connections with the tightness achieved on the thread
ISO 7
Only the male thread Rp can be screwed into the female thread Rp
Sealing on the thread, e.g. with PTFE tape or thread
R
Tapered pipe thread external connections with the tightness achieved on the thread
ISO 7
Male thread R can be screwed into female thread G or Rp

Quality
under scrutiny

FERRO takes care of the excellent quality of its products. The company puts particular emphasis on meeting the requirements of the applicable standards, maintaining high technical parameters, safety and functionality of products. All the company’s products are subject to extremely accurate and restrictive quality verification procedures. They are inspected at every production stand. The correct course of quality control processes is supervised by highly qualified engineers responsible for quality and product certification. The auditors check compliance with the procedures of the quality assurance system. These include the procedures specified by the Polish PN and European PN-EN series standards and the procedures related to the Quality Management System.

What matters
is the details

At every stage of production, FERRO attaches great importance to details, both in terms of their perfect execution and finish. Thanks to this, every product of the company is characterized by the highest quality and impeccable appearance.

Proven
in action

The FERRO Group places particular emphasis on meeting the requirements of current standards, maintaining high technical parameters, safety and functionality of its products. That is why we have implemented the ISO 9001:2015 Quality Management System. Our products are regularly awarded and honoured for their robust quality and high standard of workmanship. Many of them have won valuable distinctions granted by the environment and industry institutions and reputable interior design, construction and financial magazines.

FERRO GROUP
in Europe

Europe